When your printer shows offline even though it’s connected to Wi-Fi, the problem is almost never the Wi-Fi itself — it’s usually the “Use Printer Offline” setting, a stuck Print Spooler service, or a stale driver telling Windows the printer is unreachable. Start with fixes #1–#3 below; they solve this for most people in under five minutes.
1. Restart the printer and the PC
It sounds basic, but printers are notorious for getting into a wedged state where their network stack stops responding while the Wi-Fi light stays on. Turn the printer completely off (not just sleep — use the power button), unplug it for 30 seconds, then plug it back in and power it on. Restart your PC at the same time.
Wait for the printer to fully reconnect to Wi-Fi (the wireless light should go solid, not blink) before testing. If the printer shows offline only intermittently, pay attention to whether it happens after the printer sleeps — that points to a power-saving issue covered in fix #5.
2. Uncheck “Use Printer Offline”
Windows has a setting that forces a printer to stay offline regardless of its actual connection — and it gets enabled by stuck print jobs more often than anyone would like. Go to Settings > Bluetooth & devices > Printers & scanners, click your printer, then Open print queue.
In the queue window, click Printer in the menu bar. If Use Printer Offline has a checkmark next to it, click it to uncheck. The status should flip to “Ready” almost immediately. While you’re in this menu, also clear any stuck documents in the queue — right-click them and choose Cancel — because a jammed job can re-trigger offline mode.
3. Set it as the default printer
Sometimes Windows loses track of which printer is which — especially after updates — and sends jobs to a ghost copy of your printer while the real one sits “offline.” In Settings > Bluetooth & devices > Printers & scanners, click your printer and hit Set as default.
If you see two entries for the same printer (e.g. “HP LaserJet” and “HP LaserJet (Copy 1)”), the duplicate is often the culprit. Remove the extra one: click it, then Remove device. Keep the one that matches your actual printer model.
4. Restart the Print Spooler service
The Print Spooler is the Windows service that manages all printing. When it hangs, printers show offline even though the hardware is fine. Press Windows + R, type services.msc, and press Enter.
Scroll to Print Spooler, right-click it, and choose Restart. Wait a few seconds, then check your printer status. If the Spooler keeps stopping on its own, a corrupted driver is usually to blame — continue to fix #6. As a deeper clean, you can also stop the Spooler, delete the files in C:\Windows\System32\spool\PRINTERS, and start it again — that wipes every stuck job at the source.
5. Reconnect the printer to Wi-Fi
A printer can be “connected” to Wi-Fi in name only — holding an expired IP address or connected to a different band than your PC. On the printer’s own control panel (or its companion app), forget the current network and reconnect fresh. Make sure it joins the same network your PC is on.
Two common gotchas: many printers only work on the 2.4GHz band, so if your router steers devices to 5GHz, the printer may connect but communicate poorly — check your router’s app for band settings. And if your printer’s IP keeps changing, give it a static IP (or a DHCP reservation in your router) so Windows always finds it at the same address — this permanently fixes printers that go offline every few days.
6. Update or reinstall the printer driver
A corrupted or outdated driver is a classic cause of the phantom-offline problem. The fastest path: go to your printer manufacturer’s website (HP, Canon, Brother, Epson), search your exact model, and download the latest full driver package — not the basic Windows Update driver.
For a clean reinstall, first remove the printer in Settings > Bluetooth & devices > Printers & scanners, then open Print Management (search for it in the Start menu), expand Custom Filters > All Drivers, right-click your printer’s driver and choose Remove driver package. Then install the fresh driver you downloaded. Windows Update drivers are convenient but often stripped-down; the manufacturer’s package includes the status monitor that reports online/offline correctly.
7. Remove and re-add the printer
If the driver’s fine but Windows still insists the printer is offline, the printer’s port configuration in Windows may be pointing at a stale IP. Remove the printer completely: Settings > Bluetooth & devices > Printers & scanners, click it, Remove device.
Then click Add device and let Windows rediscover it on the network. If auto-discovery fails, click Manually add and choose Add a printer using a TCP/IP address, then enter the printer’s current IP address (print a network configuration page from the printer’s panel to find it). A fresh TCP/IP port pointing at the correct address resolves most stubborn offline states.
8. Disable SNMP status — a top fix when the printer shows offline
This is the hidden fix that solves a huge number of “printer shows offline” cases. Windows polls printers via SNMP to check their status, and many printers either don’t answer correctly or answer slowly — so Windows marks them offline even while they’re happily printing. Open Settings > Bluetooth & devices > Printers & scanners, click your printer, then Printer properties.
Go to the Ports tab, select the port your printer uses, click Configure Port, and uncheck “SNMP Status Enabled.” Click OK. This stops Windows from relying on the flaky status poll, and the printer will show as ready. If you ever need SNMP monitoring for a managed office setup, re-enable it — but for home use, off is better.
9. Check your firewall isn’t blocking the printer
Windows Defender Firewall (or a third-party firewall) can block the ports printers use to announce themselves on the network, making them appear offline. Temporarily disable your firewall for a minute and check the printer status — if it flips to online, you’ve found it.
To fix it properly rather than leaving the firewall off: go to Settings > Privacy & security > Windows Security > Firewall & network protection > Allow an app through firewall and make sure your printer’s software is allowed on private networks. Re-enable the firewall afterward. If you use third-party security software, check its firewall rules for blocked printer or network-discovery entries.
Printer shows offline — FAQs
Why does my printer keep showing offline even though it’s connected to WiFi?
Because “offline” in Windows usually describes the software connection, not the Wi-Fi connection. The printer can be on the network while Windows can’t reach it due to a stale IP, the “Use Printer Offline” flag, a stuck spooler, or SNMP misreporting. Work through fixes #2, #4, and #8 — they address the reporting chain directly.
How do I get my printer from offline back online?
The quickest sequence: restart the printer and PC, uncheck “Use Printer Offline” in the print queue, restart the Print Spooler service, and if it’s still offline, disable SNMP status on the printer port. That combination resolves the problem in the large majority of cases.
How to fix printer offline in Windows 11?
Follow the steps above in order — they apply specifically to Windows 11’s Settings layout. Microsoft’s own printer troubleshooter can also help with basic cases: Microsoft printer troubleshooter. For persistent issues, the SNMP fix (#8) and a clean driver reinstall (#6) are the heavy hitters.


