iPhone Alarm Not Going Off? 8 Fixes That Work

iPhone Alarm Not Going Off? Fix It

Quick Answer

If your iphone alarm not going off, first confirm that the alarm is enabled, assigned to the correct day, and has a sound selected. Then increase the Ringtone and Alerts volume, check your separate Sleep Schedule alarm, and disable Attention Aware if the alarm becomes unusually quiet when you look at the phone.

Why This Happens

  • The alarm is disabled or its Repeat setting excludes the required day.
  • The alarm's Sound is set to None, causing vibration without an audible alert.
  • Ringtone and Alerts volume is too low, even though music or video volume is high.
  • Attention Aware lowers alert volume after detecting that you are looking at the iPhone.
  • The Health app's Wake Up alarm is disabled even though the Sleep Schedule remains active.
  • Incorrect time-zone settings, an iOS issue, or a speaker problem prevents the alarm from working as expected.

1. Check the Alarm Time, Days, and Enabled Switch

Start by checking the alarm itself. A recurring alarm can appear correctly configured but still exclude the day on which you expect it to ring.

  1. Open the Clock app.
  2. Tap Alarms at the bottom.
  3. Find the required alarm and make sure its switch is on.
  4. Tap the alarm time. On some iOS versions, tap Edit first and then select the alarm.
  5. Check whether the time is set for AM or PM if your iPhone uses the 12-hour clock.
  6. Tap Repeat.
  7. Select every day on which the alarm should sound.
  8. Tap Back, followed by Save or Done.

For example, a weekday alarm should have Monday through Friday selected. If no days are selected, it is a one-time alarm and may automatically turn off after it rings.

Set a test alarm for two minutes ahead, lock the iPhone, and wait without using the Clock app. Apple confirms that regular Clock alarms are separate from alarms created through a Health sleep schedule. Apple Support

2. Make Sure the Alarm Sound Is Not Set to None

An alarm with Sound set to None can appear on the screen without playing an audible tone. Depending on the selected haptic setting, it may only vibrate.

To assign an alarm sound:

  1. Open Clock > Alarms.
  2. Tap Edit in the upper-left corner if it appears.
  3. Select the alarm that is not working.
  4. Tap Sound.
  5. Make sure None is not selected.
  6. Under Ringtones, choose a built-in sound such as Radar or another available tone.
  7. Tap the sound once and confirm that you can hear its preview.
  8. Tap Back, then select Save or Done.

For testing, use a built-in ringtone instead of a song from Apple Music. A song may become unavailable after it is removed from your library, its download is deleted, or your subscription status changes.

Also check Haptics on the Sound screen. Haptics can supplement an audible alarm, but they should not be treated as a replacement if you need sound. Apple specifically recommends checking for Sound > None when an alarm only vibrates. Apple Support

3. Increase the Correct Alarm Volume

The volume slider in Control Center normally controls media playback. It is not necessarily the same volume used by alarms.

Adjust the alarm volume here:

  1. Open Settings.
  2. Tap Sounds & Haptics.
  3. Find Ringtone and Alerts.
  4. Drag the volume slider to the right.
  5. Listen for the preview sound while moving the slider.
  6. Turn off Change with Buttons if you frequently lower the volume accidentally with the physical buttons.

With Change with Buttons disabled, the side volume buttons continue controlling media volume without changing the configured alert volume.

Silent mode, the Ring/Silent switch, and Focus modes such as Do Not Disturb do not mute Apple's built-in Clock alarms. An alarm should also play through the built-in speaker when wired or wireless headphones are connected. Therefore, repeatedly turning off Silent mode or Do Not Disturb is unlikely to fix a properly configured Clock alarm. Apple Support

4. Turn Off Attention Aware Features

On Face ID models, Attention Aware can lower alert volume when the TrueDepth camera detects that you are looking at the screen. This can make an alarm seem to become quiet immediately after you pick up or look toward your iPhone.

To test without Attention Aware:

  1. Open Settings.
  2. Tap Face ID & Passcode.
  3. Enter your iPhone passcode.
  4. Scroll down to Attention Aware Features.
  5. Turn Attention Aware Features off.
  6. Set a test alarm for two minutes ahead.
  7. Lock the phone and compare its volume with your previous alarms.

This setting is available on supported Face ID devices, beginning with iPhone X and later models. It is not the same as Face ID authentication: Attention Aware may operate through the TrueDepth camera even if you do not actively use Face ID to unlock the phone.

If disabling it makes no difference, you can turn it back on. Apple confirms that Attention Aware can automatically lower alert volume when attention is detected. Apple Support

5. Check the Separate Sleep Schedule Alarm

A regular Clock alarm and the Health app's Wake Up alarm are separate systems. Your sleep schedule can remain visible even when its Wake Up alarm has been turned off.

To check the next Wake Up alarm:

  1. Open Clock > Alarms.
  2. Find the Sleep | Wake Up section.
  3. Tap Change.
  4. Scroll to Alarm Options.
  5. Turn Alarm on.
  6. Tap Sounds & Haptics and choose an audible tone.
  7. Increase the Alarm Volume slider.
  8. Tap Done.
  9. Choose Change Next Alarm Only for one day or Change This Schedule for the recurring schedule.

You can also open Health > Search > Sleep. On some iOS versions, the bottom tab is labeled Browse instead of Search. Open Full Schedule & Options, select the relevant schedule, and tap Edit. Confirm the active days, wake-up time, alarm switch, sound, and volume before tapping Done.

Changing only the next alarm does not update future Wake Up alarms. Apple Support

6. Enable Automatic Date and Time

An incorrect date, time zone, or manual clock adjustment can make an alarm ring at an unexpected time.

Check the time settings:

  1. Connect the iPhone to Wi-Fi or cellular data.
  2. Open Settings > General > Date & Time.
  3. Turn on Set Automatically.
  4. Confirm that the displayed time zone is correct.

If the time zone remains wrong:

  1. Open Settings > Privacy & Security > Location Services.
  2. Make sure Location Services is enabled.
  3. Scroll down and tap System Services.
  4. Turn on Setting Time Zone.
  5. Return to Settings > General > Date & Time and recheck the time.

The automatic-time switch may be unavailable on an organization-managed iPhone or a device with certain Screen Time restrictions. Avoid manually advancing or reversing the clock to affect app timers; Apple warns that manual time changes can affect alarms. Apple Support

7. Delete and Recreate the Alarm, Then Restart

If one specific alarm fails while newly created alarms work, delete the affected alarm and rebuild it.

  1. Open Clock > Alarms.
  2. Swipe left across the problematic alarm.
  3. Tap the Trash or Delete button.
  4. Tap the Add (+) button.
  5. Set the time, Repeat days, label, sound, and snooze options.
  6. Tap Done.
  7. Set another temporary alarm for two minutes ahead and test it.

If it still fails, restart the iPhone. On iPhone X or later, press and hold the side button and either volume button until the power-off slider appears. Drag the slider, wait 30 seconds, and hold the side button until the Apple logo appears.

On iPhone 6, 7, 8, or SE (second or third generation), hold only the side button to display the slider. Restarting reloads the Clock service without deleting alarms or other data. Apple Support

8. Update iOS and Test the Speaker

Install available iOS updates because they include bug fixes that may affect system apps and notifications.

  1. Back up important data.
  2. Connect the iPhone to Wi-Fi and power.
  3. Open Settings > General > Software Update.
  4. Wait while the phone checks for updates.
  5. Tap Download and Install or Update Now, depending on the displayed option.
  6. Follow the onscreen instructions.
  7. After the update, create a test alarm with a built-in sound. Apple Support

If no test tone plays under Settings > Sounds & Haptics > Ringtone and Alerts, remove any case blocking the speaker and inspect the speaker opening for debris. Clean it only with a clean, dry, soft-bristled brush.

Drag the Ringtone and Alerts slider back and forth. If no preview plays, the speaker icon is dimmed, or calls on speakerphone are also silent, the problem may require Apple service rather than another alarm setting. Apple Support

iPhone Alarm Not Going Off FAQs

Will an iPhone alarm sound in Silent mode?

Yes. Apple's built-in Clock alarms sound when Silent mode or Do Not Disturb is enabled. However, the alarm needs an audible sound selected, and the Ringtone and Alerts volume must be high enough.

Does an iPhone alarm work when the phone is turned off?

No. The iPhone must be powered on for a Clock or Wake Up alarm to sound. It can remain locked, in Silent mode, or in a Focus mode, but it should not be shut down or have an empty battery.

Why does my iPhone alarm only vibrate?

Open Clock > Alarms, edit the alarm, and select Sound. If None is selected, choose a built-in ringtone. Then check Settings > Sounds & Haptics > Ringtone and Alerts and raise the volume.

Why does my alarm work on weekdays but not weekends?

The selected Repeat days probably exclude Saturday and Sunday. Open Clock > Alarms, select the alarm, tap Repeat, enable the missing days, and tap Save or Done.

Related Guides

About Galib Rizvi

Galib Rizvi founded FixTechly to publish clear, step-by-step troubleshooting guides for Windows, Android, iPhone, and Mac. Every guide is researched from official documentation and real-world fixes.