WiFi Connected but No Internet Android? 8 Fixes to Try

WiFi connected but no internet on Android phone

If you’re experiencing wifi connected but no internet android, your phone is connected to a wireless router but cannot access the internet through that connection. Start by checking whether other devices can use the same Wi-Fi network, then reconnect your phone, check DNS settings, and investigate the router. The problem may come from your Android network configuration, a router issue, or an internet service outage.

Why Your Android Phone Shows Wi-Fi Connected but No Internet

A Wi-Fi connection and an internet connection are not the same thing. Your Android phone can communicate with a router even when that router cannot reach the internet.

Common causes include:

  • Router or ISP problems: Your router may be broadcasting Wi-Fi even though its internet connection is unavailable.
  • Incorrect IP configuration: Your phone may have an invalid IP address, gateway, or manually configured network setting.
  • Private DNS problems: A custom DNS provider may be unavailable or blocked by the current network.
  • Captive portal authentication: Public Wi-Fi networks may require you to accept terms or sign in before accessing the internet.
  • VPN or network filtering: A VPN, DNS-filtering app, or firewall may interfere with connectivity.
  • Saved network configuration problems: Previously stored Wi-Fi settings may no longer match the router’s configuration.

The most useful first step is determining whether the problem affects only your phone or every device connected to the same network.

1. Check Whether the Router Actually Has Internet Access

Before modifying Android settings, confirm that the Wi-Fi network itself has a working internet connection.

Follow these steps:

  1. Keep your Android phone connected to the affected Wi-Fi network.
  2. Open Chrome and visit a website you have not recently opened.
  3. If the page does not load, try another website.
  4. Connect a laptop, tablet, or another phone to the same Wi-Fi network.
  5. Test internet access on that second device.
  6. If neither device can access the internet, inspect your router’s status lights.
  7. Look for an Internet, WAN, or similar indicator, depending on the router model.
  8. If the second device works normally, focus on your Android phone rather than the ISP.

You can also turn off Wi-Fi on your Android phone and test the same website using mobile data.

If mobile data works while Wi-Fi fails, that helps isolate the problem to the Wi-Fi connection or its settings.

Important distinction: A strong Wi-Fi signal only means your phone has a good wireless connection to the access point. It does not confirm that the router has an active internet connection.

If every connected device fails, move to the router troubleshooting section rather than resetting your phone.

2. Forget the Wi-Fi Network and Connect Again

Android remembers network passwords and connection settings. If those settings are outdated or incorrect, removing the saved network and reconnecting may help.

On Google Pixel phones and many devices using stock Android:

  1. Open Settings.
  2. Go to Network & internet > Internet.
  3. Find your connected Wi-Fi network.
  4. Tap the gear icon beside its name.
  5. Select Forget.
  6. Return to the list of available Wi-Fi networks.
  7. Tap your network name.
  8. Enter the correct Wi-Fi password.
  9. Tap Connect.
  10. Open Chrome and test the connection.

On Samsung Galaxy phones, the typical path is Settings > Connections > Wi-Fi. Tap the gear icon beside the network and choose Forget.

For Motorola, OnePlus, Xiaomi, and other manufacturers, search for Wi-Fi in Settings if the menus differ.

Forgetting a network removes its saved connection configuration, including its password. Make sure you know the Wi-Fi password before proceeding.

If the connection works after reconnecting, the previously saved configuration may have contributed to the problem.

3. Fix Incorrect Private DNS Settings

Android supports Private DNS, which can encrypt DNS queries when a compatible DNS service is available.

However, a custom DNS hostname may prevent websites from resolving if the configured service becomes unreachable or is blocked on the current network.

Follow these steps on Google Pixel or similar Android devices:

  1. Open Settings.
  2. Select Network & internet.
  3. Tap Private DNS.
  4. Check which option is currently selected.
  5. If Private DNS provider hostname is selected, note the existing hostname.
  6. Select Automatic.
  7. Tap Save.
  8. Disconnect and reconnect to Wi-Fi.
  9. Open Chrome and test a website.

On Samsung phones, look under Settings > Connections > More connection settings > Private DNS.

Some Android manufacturers place this setting elsewhere. Use the Settings search bar if necessary.

Google recommends leaving Private DNS enabled where supported. Automatic is generally preferable to permanently disabling this protection.

Practical observation: If a website opens when you enter its numerical IP address but not its domain name, DNS resolution may be involved. However, this is not a definitive test because many websites require the correct hostname for HTTPS connections.

If you previously configured a custom DNS provider for ad blocking or parental controls, changing it to Automatic may also change those filtering features.

4. Complete the Public Wi-Fi Sign-In Process

Public Wi-Fi networks frequently require an additional authentication step.

You may encounter this in hotels, airports, coffee shops, hospitals, and college campuses.

Android can display a Wi-Fi connection even before the network grants full internet access.

Follow these steps:

  1. Connect to the public Wi-Fi network.
  2. Wait for a notification such as Sign in to Wi-Fi network.
  3. Tap the notification if it appears.
  4. Read the network’s login instructions.
  5. Enter any required room number, access code, or account credentials.
  6. Accept the network’s terms if you agree to them.
  7. Complete the sign-in process.
  8. Open Chrome and test internet access.

If the login page does not appear:

  1. Open Chrome.
  2. Enter http://neverssl.com in the address bar.
  3. Check whether the network redirects you to its sign-in portal.
  4. If no portal appears, disconnect and reconnect to the Wi-Fi network.

A plain HTTP page can sometimes trigger a captive portal that does not redirect HTTPS traffic correctly.

Do not enter sensitive passwords into an unfamiliar login page. Confirm that the portal belongs to the network operator.

Some public networks also restrict the number of devices allowed under one account.

If the portal continues to reject your connection, contact the network administrator.

5. Restart the Router and Check Its Internet Connection

If multiple devices connect to Wi-Fi but cannot access the internet, the router or upstream connection deserves attention.

Restarting the router can help recover certain temporary connection problems. It does not repair a physical line outage or unpaid service.

Follow these steps:

  1. Locate your Wi-Fi router.
  2. Check whether its Internet or WAN indicator shows an error.
  3. Disconnect the router’s power cable.
  4. Wait approximately 30 seconds.
  5. Reconnect the power cable.
  6. Allow the router to complete its startup process.
  7. If you have a separate modem or optical network terminal, check its status indicators.
  8. Reconnect your Android phone and test the internet.

Google includes restarting a wireless router in its Android Wi-Fi troubleshooting guidance.

Avoid pressing the small Reset button unless you specifically intend to restore factory settings.

A factory reset may remove the router’s Wi-Fi name, password, and ISP configuration.

If your router displays an optical signal error, an offline WAN connection, or an ISP authentication failure, restarting your Android phone will not resolve that underlying problem.

Contact your internet service provider if the router cannot establish its internet connection.

6. Disable VPN Interference and Check IP Settings

VPN services and manually configured network settings can interfere with internet access.

If the problem started after installing a VPN, privacy application, or network management tool, temporarily disable the relevant service for testing.

Check your VPN:

  1. Open Settings.
  2. Go to Network & internet > VPN on most Pixel devices.
  3. On Samsung, check Connections > More connection settings > VPN.
  4. Select the active VPN connection.
  5. Disconnect it if the device permits.
  6. Reconnect to Wi-Fi and test internet access.

If a personal VPN automatically reconnects, open its app and temporarily disable auto-connect for the test.

Next, check whether your Wi-Fi network uses a manually configured IP address.

On many Android devices:

  1. Open the connected network’s details.
  2. Find IP settings under Advanced or a similar section.
  3. Check whether Static or DHCP is selected.
  4. If Static is selected and you did not intentionally configure it, record the existing settings.
  5. Change to DHCP.
  6. Save and reconnect.

DHCP normally allows the router to assign the IP address, gateway, and other connection information automatically.

Do not change static IP settings on a workplace, school, or managed network without permission.

7. Reset Wi-Fi and Bluetooth Network Settings

If your phone fails to access the internet on multiple working Wi-Fi networks, its network configuration may need to be reset.

This is more disruptive than forgetting a single network.

On many Pixel devices running recent Android versions:

  1. Open Settings.
  2. Select System.
  3. Tap Reset options.
  4. Look for Reset Bluetooth & Wi-Fi.
  5. Review the confirmation screen.
  6. Confirm the reset if you agree.
  7. Reconnect to your Wi-Fi network.
  8. Enter its password and test internet access.

On Samsung phones, look under Settings > General management > Reset for Wi-Fi and Bluetooth or network-reset options. The exact labels vary by One UI version.

A network reset may remove saved Wi-Fi networks, paired Bluetooth devices, and related preferences, depending on the reset option and manufacturer.

It does not normally delete photos, messages, or installed apps.

Before proceeding, confirm that you have the passwords for important Wi-Fi networks.

If your phone connects successfully afterward, one of the previous network settings may have contributed to the failure.

8. Check Android Updates and Test Another Wi-Fi Network

If the problem persists after checking the router and network configuration, determine whether it affects all Wi-Fi networks.

Follow these steps:

  1. Disconnect from your current Wi-Fi network.
  2. Connect to another trusted Wi-Fi network, if available.
  3. Alternatively, connect to a hotspot from another phone with working mobile data.
  4. Open Chrome and test several websites.
  5. If the second network works, investigate the original router’s settings.
  6. If neither network works, open Settings.
  7. On Pixel devices, go to System > Software updates.
  8. Check for available Android updates and follow the instructions.
  9. Restart if required and test again.

On Samsung devices, the usual update path is Settings > Software update > Download and install.

If a software update requires internet access, use a working connection and follow the manufacturer’s download instructions.

If your phone cannot access the internet through multiple known-working networks, the problem may involve its software, security configuration, or Wi-Fi hardware.

If available, run the device manufacturer’s built-in Wi-Fi diagnostic tool before considering service.

Troubleshooting Notes

Android 16 uses different Settings layouts across manufacturers. Google Pixel commonly uses Network & internet > Internet, while Samsung Galaxy phones use Connections > Wi-Fi. Xiaomi, Motorola, and OnePlus may use different names.

Keep these observations in mind:

  • Connected without internet: Android can reach the wireless network but cannot verify usable internet access.
  • Only one network fails: Investigate that router, its DNS configuration, and its authentication requirements.
  • Every network fails: Check VPN settings, Android network configuration, and possible device-related problems.
  • Public Wi-Fi fails only: A missing captive portal login may be the cause.
  • Wi-Fi works for some apps: DNS filtering, firewall rules, or individual app restrictions may explain the difference.

If the problem began after changing router settings, check the router configuration before resetting the phone.

WiFi Connected but No Internet Android FAQs

Why does my Android say connected without internet when Wi-Fi is working?

Your phone may be connected to the router while the router’s internet connection is unavailable. DNS problems, captive portals, and network restrictions can also produce this message.

How do I fix connected without internet on Samsung?

Start with Settings > Connections > Wi-Fi. Forget the affected network, reconnect using the correct password, and check Private DNS under More connection settings. If necessary, investigate the router.

Can Private DNS cause no internet on Android?

Yes. A custom Private DNS provider that cannot be reached may prevent domain-name resolution. Changing the setting to Automatic can help determine whether that configuration is involved.

Will resetting network settings delete my photos?

No. A normal Wi-Fi or network-settings reset does not erase your personal photos. It can remove saved network passwords, Bluetooth pairings, and connection preferences.

Final takeaway: First check whether another device can access the internet through the same router. If other devices work, focus on Android’s saved Wi-Fi configuration, Private DNS, VPN, and IP settings. If every device fails, investigate the router and internet provider.

About Galib Rizvi

Galib Rizvi founded FixTechly to publish clear, step-by-step troubleshooting guides for Windows, Android, iPhone, and Mac. Every guide is researched from official documentation and real-world fixes.