Quick Answer
To unmirror your iPhone from your TV, open Control Center (swipe down from the top-right corner), tap Screen Mirroring, then tap Stop Mirroring at the bottom of the device list. Your iPhone screen disconnects instantly and the TV returns to its own input. If mirroring seems stuck or your iPhone keeps reconnecting on its own, the five methods below cover every scenario, including app-level casting and automatic AirPlay.
Why This Happens (Why It’s Still Connected)
Screen mirroring staying on is usually working as designed — iPhones are just aggressive about maintaining the connection:
- The AirPlay session is still active. Tapping the Home button or locking your phone doesn’t end mirroring — only explicitly stopping it does.
- Automatic AirPlay. iPhones automatically reconnect to AirPlay TVs you’ve used before when you’re on the same Wi-Fi network.
- App-level casting is separate. If you cast from inside YouTube or Netflix (rather than using system Screen Mirroring), stopping Screen Mirroring in Control Center won’t disconnect it — you have to stop it inside the app.
- Stuck session. Occasionally the handshake between iPhone and TV freezes, and the TV keeps showing your screen even after you tap Stop Mirroring.
Method 1: Stop Mirroring From Control Center (The Main Way)
This ends system-level Screen Mirroring — the method that mirrors your entire iPhone display.
- Open Control Center: on iPhone X and later (including all current models), swipe down from the top-right corner of the screen. On iPhone 8 and earlier, swipe up from the bottom edge.
- Tap the Screen Mirroring button (the icon with two overlapping rectangles). It will be highlighted while mirroring is active.
- A list of available devices appears. Scroll to the bottom and tap Stop Mirroring.
- Your iPhone disconnects immediately. The TV should return to its previous input or show its home screen within a few seconds.
If the TV still shows your screen after tapping Stop Mirroring, the session is stuck — skip to Method 4.
Method 2: Disconnect From Inside the App
If you started casting from within an app (YouTube, Netflix, Disney+, Spotify), the connection lives inside that app — Control Center’s Screen Mirroring won’t show or stop it.
- Open the app you were casting from on your iPhone.
- Look for the cast/AirPlay icon: in YouTube it’s a rectangle with a Wi-Fi-like symbol (top-right of the video); in Netflix it’s the same icon near the top; in most apps it’s the AirPlay icon (triangle with concentric arcs).
- Tap the icon. A device list appears showing your TV as connected.
- Tap Disconnect, or select iPhone / This device instead of the TV.
- The video stops on the TV. Your phone keeps playing locally (or pauses — just press play).
Key distinction to remember: System Screen Mirroring (Method 1) mirrors your whole screen including notifications. App casting only sends that app’s video. They are independent — check both if your TV is still showing something.
Method 3: Fully Disable Wi-Fi or Bluetooth in Settings
When you can’t find the right button — or someone else’s phone is mirrored and you just want it off your TV — fully disabling the underlying connection works. Note: the Control Center toggles only disconnect Wi-Fi/Bluetooth temporarily — they don’t fully turn them off, so AirPlay can still work. For a complete break, use Settings.
- Go to Settings > Wi-Fi and toggle Wi-Fi Off. This fully disables Wi-Fi (unlike the Control Center toggle), so AirPlay and Screen Mirroring drop within seconds. (AirPlay needs Wi-Fi, or a wired Apple TV connection.)
- Alternatively, go to Settings > Bluetooth and toggle it Off — some TVs use Bluetooth for discovery and handshake.
- Don’t rely on Airplane Mode alone for this: Wi-Fi and Bluetooth can stay enabled or be re-enabled while Airplane Mode is on, so it won’t necessarily break the connection.
- Turn Wi-Fi back on afterward if you need internet — mirroring won’t resume on its own unless Automatic AirPlay is enabled (see Method 5).
On the TV side: You can also just switch the TV to a different input (HDMI 1, cable, etc.) with the TV remote, or turn the TV off and on. The iPhone stays “mirroring” in its own mind, but nothing displays.
Method 4: Fix Stuck Mirroring With a Restart
Sometimes everything looks disconnected on the iPhone while the TV stubbornly keeps showing your screen. That’s a frozen AirPlay session — restart both ends.
- On your iPhone, tap Stop Mirroring in Control Center first (Method 1), even if it seems to do nothing.
- Restart your iPhone: press and hold the side button + either volume button until the power slider appears, drag it, wait 30 seconds, then hold the side button to boot back up. (iPhone 8 and earlier: hold just the side/top button.)
- Restart your TV: don’t just put it in standby — unplug it from the wall for 30 seconds, then plug it back in. Smart TVs keep network sessions alive in standby, so a full power cycle is what actually clears the stuck session.
- If you use an Apple TV box instead of a smart TV’s built-in AirPlay, restart that too: Settings > System > Restart on the Apple TV.
- After both are back up, verify Control Center shows Screen Mirroring as inactive before reconnecting Wi-Fi-dependent apps.
Method 5: Stop Your iPhone From Auto-Mirroring to the TV
If your iPhone keeps connecting to the TV by itself every time you’re on the same Wi-Fi, Automatic AirPlay is the cause. Turn it off once and it stays off.
- On your iPhone, go to Settings > General > AirPlay & Handoff.
- Tap Automatically AirPlay.
- Change it from Automatic to Never. (The middle option, Ask, prompts you each time — a good compromise if you mirror often but want control.)
- While you’re here, check “Transfer to HomePod” and similar continuity toggles only if they’re causing their own annoyances — they don’t affect TV mirroring.
- Going forward, your iPhone will only mirror when you explicitly tap Screen Mirroring and choose the TV.
Also check the TV’s settings: Many smart TVs (Samsung, LG, Roku, Fire TV) have their own “AirPlay” or “screen mirroring” toggle, sometimes with an option like “Allow new devices: Always / Ask / Never.” Setting it to Ask means nothing can mirror without your on-TV confirmation — useful in households where multiple people’s phones keep hijacking the TV.
How to Unmirror iPhone From TV FAQs
How do I turn off Screen Mirroring on my iPhone?
Swipe down from the top-right corner to open Control Center, tap Screen Mirroring (two overlapping rectangles), then tap Stop Mirroring at the bottom of the list. That’s the complete off switch for system-level mirroring.
Why does my iPhone keep connecting to my TV automatically?
Automatic AirPlay reconnects your iPhone to TVs you’ve used before whenever you’re on the same Wi-Fi. Go to Settings > General > AirPlay & Handoff > Automatically AirPlay and set it to Never (or Ask if you want a prompt each time). Also check the TV’s own AirPlay settings — setting new-device approval to “Ask” stops surprise connections from any phone in the house.
What’s the difference between AirPlay and Screen Mirroring?
Screen Mirroring duplicates your entire iPhone display on the TV — apps, notifications, everything. AirPlay (tapping the AirPlay icon inside an app like YouTube or Apple Music) sends only that app’s audio/video while your phone screen stays private and usable. They’re controlled separately: Control Center stops mirroring; the in-app icon stops AirPlay casting. Apple’s support article on using AirPlay walks through both streaming and mirroring on iPhone and iPad.
I stopped mirroring but Netflix is still playing on my TV. Why?
Because Netflix was casting, not screen mirroring. Open Netflix on your iPhone, tap the cast icon, and tap Disconnect (or select your iPhone instead of the TV). Control Center’s Stop Mirroring only ends system mirroring — app-level casts must be stopped inside each app.

